Good Ageing Resistance Thermal Conductivity Silicone Potting
Compound for Mechanical Equipment
LEED-INK silicone encapsulant is a two-components room curing
silicone thermal conductivity encapsulant. The bi-component silicone sealing material is soft,
damp-resistance and insulation. The working condition is
The material is ageing resistance and can be taken down for
- Low viscosity, good flowability, suitable for mould pressing of
complex electronic element
- After cured, will be soft rubber-like material, excellent shock
- Heat resistance, moisture resistance, and excellent cold
resistance, can extend service life of electronic elements.
1) Component A and component B should use special tools separately.
Do not use the tools in mixture.
2) Separately stir component A and component B fully and evenly
3) Mix according to A:B=1:1, and stir it over 15min to ensure the
mixing uniformity of component A and B.
4) After mixing, deaerate the paste in vacuum equipment with 10min
before potting. To ensure the potting quality, it is recommended to
deaerate again after potting. If no deaeration, please put the
product with 30min in room temperature before heating and curing.
5) Please finish 3) and 4) within operating time(8h).
6) Curing could be done by 80℃/15min, or 24h in room temperature.
Operable Time (h)
Curing Time (h)
|Heating Curing Time (h)||100℃/15min||100℃/15min|
|Hardness (shore A)||60||42|
|Operating Temperature (℃)||-50℃-250℃||-50℃-250℃|
|Thermal Conductivity (W/m.K)||2.60||0.80|
|Volume Resistance (Ω·cm)||1014||1014|
Delivery and Storage
During transportation and storage should protect against the tide
and contamination. Containers may be stored in a cool dark, dry and
stable environment at room temperature, with their lids tightly
sealed. The shelf life of the paste is 12 months. The used material
should be collected and sealed up alone. Don’t mix with other
untapped material. Pay attention to prevent moisture and impurities
The general package is 1KG/Plastic can, 5KGS/Plastic bucket, and
Why Choose Us?
1. Any inquiries will be replied within 24 hours.
2. Ensure product with high quality and pre-commissioning before
3. Fastest delivery: Sample order in stock and 3-7 days for mass
4. Dedicated to high quality, stable supply and considerate
5.Easy payment methods : T/T, Western Union, Paypal.
6.Accept low order quantity. Easy to make a test for all customers.
Q1: Can you provide OEM or ODM service?
A: Surely we can. We have a professional team which has rich
experience in silicone sealant field. You can also design your
logo,packaging and other details.If the existing products can meet
your requirements, we can provide you with customized service.
Q2: Can i take sample?
A: Yes,we are honored to provide you sample. 1~2PCS and 50~100ML/PCS
,Free sample and Customer bear the freight.
Q3: What payment term is available?
A: We can accept Paypal, TT, Western Union.
Q4: What's the lead time?
A: 1~3 days for sample ,5~7 workdays for mass order.